As an access layer PoE switch, DH-PFS3010-8ET-96 supports simultaneous access of up to 8 cameras, and is applicable for monitoring scenarios such as office, school, hotel, supermarket, and hospital. DH-PFS3010-8ET-96-V2 provides eight 100 Mbps PoE Ethernet ports and two gigabit Ethernet ports.
Rich Port Types
Eight 10/100 Mbps Base-T PoE Ethernet ports; two 10/100/1000 Mbps Base-T Ethernet ports.
Intelligent PoE
The switch features intelligent PoE power consumption management to help keep the power and data flowing, even when the switch experiences a power fault. Intelligent PoE monitors the power consumption of the connected devices, and in the event of large power fluctuations, the switch shuts down one port at a time rather than shutting down all ports. Unlike typical switches that shut down all ports as once, this switch shuts down the highest number port first, then the next highest number until the switch detects the power consumption is below the PoE budget.
BT 90W
The red port supports the IEEE802.3bt and the Hi-PoE standards. The maximum power consumption is 90 W.
PoE Watchdog
The switch employs an innovative PoE watchdog function that automatically detects a network port failure and restarts network communication on the port. This functionality avoids manual maintenance and network restarts, saving time and reducing costs.
Long Distance PoE
Long-distance PoE transmission extends the maximum transmission distance to 250 m (from 100 m), but reduces transmission speed to a maximum of 10 Mbps (from 1000 Mbps).
8-pin Assignment PoE Power Supply
The 8-pin Ethernet port supports power supply, to enhance front-end and rear-end compatibility. Reduce cable loss and promote loading capacity.