Monocrystalline photovoltaic module JINKO SOLAR, with a power output of 485W and dimensions of 1906x1134x30 mm. It offers remarkable energy efficiency with a nominal power per surface area of 224W/m². Suitable for both residential and commercial buildings, it provides installation versatility for various energy needs.
The panel is equipped with photovoltaic cells that convert solar energy into electricity through the photovoltaic effect. The TOPCon technology used improves cell efficiency compared to traditional PERC modules. Each module contains 120 cells arranged in a 60x2 matrix, built with advanced German technology, ensuring high performance even in low light conditions and reducing heat to maintain high efficiency.
The module's thermal coefficient is -0.29%/°C relative to 25°C, meaning at 29°C, the power loss will be 2.9%. The modules are Tüv NORD certified and equipped with an IP67/IP68 junction box with 3 diodes, 2 output cables of 40 cm (4 mm²) with MC4 connectors, and an anodized aluminum frame. They support wind and snow loads up to 2400Pa and 5400Pa, respectively. With a module efficiency of 22.44%, they offer a 30-year warranty on 87.4% of producibility and linear performance.
The modules can be connected in series (voltage summing) or in parallel (current summing), depending on the requirements and maximum values supported by the MPPT charge controller. For details on maximum input voltage and current for each MPPT, refer to the technical data sheet of the hybrid or grid-connected photovoltaic inverter.