KIT for the automation of sliding gates up to 400Kg. 24 Vdc, integrated control unit.
Simple: thanks to the BlueBUS system that allows connections to only two wires between the control unit and up to 7 pairs of MoonBus series photocells, command, safety and signaling devices
Practical: control unit and PS124 buffer batteries (optional) which can be connected via a convenient connector to a guided cable, housed inside the Robus
Advanced: RB400 is equipped with a temperature sensor that adapts the motor force to the climatic conditions, adapting at the same time to the thermal protection. A selection of maste / slave automatically synchronizes also 2 motors, allowing the automation of sliding gates with two opposite wings
Intelligent: thanks to obstacle detection and automatic programming of work times. Self-diagnosis with signaling via the flashing light.8 Programming levels.
Safe: adjustable acceleration and deceleration, at the beginning and end of each maneuver. Silenzio, gear motor on bearings.
Robust: Base and release in die-cast aluminum with epoxy painting.
Silent: gear motor on bearings
The KIT CONTAINS:
Item number | Description | Quantity |
RB400BD
|
Irreversible electromechanical gear motor, with built-in OXI control unit and receiver for connection via Nice BlueBUs
|
1
|
ON3EBD
|
Bidirectional Transmitter 433.92 Mhz with 3 channels
|
2
|
EPMB |
Pair of external photocells prepared for connection via Nice BlueBUS
|
1
|
OXIBD |
433.93 Mhz bidirectional plug-in receiver
|
1
|
ELB
|
Flashing light with integrated antenna
|
1
|
TS
|
Table of signs
|
1
|
NYCGN
|
Nylon PA6 Galvanized rack module 4 20x20 1 Mt
|
6 M
|
FEATURES
CODE
RB400
ELECTRICAL DATA
POWER SUPPLY (VAC 50 HZ)
230
ABSORPTION (A)
1.1
POWER (W)
250
PERFORMANCE DATA
SPEED (M / S)
00:34
FORCE (N)
400
WORK CYCLE (CICLI / ORA)
35
DIMENSIONAL AND GENERIC DATA
PROTECTION RATING (IP)
44
TEMP. OPERATING (Â ° C MIN / MAX)
-20 Ã · +50
DIMENSIONS (MM)
330x195x303 h
WEIGHT KG)
8