Box 1 PZ

Pyronix Hikvision KX15DT Dual technology detector using PIR and Microwave sensors 15m bluewave

Name: Pyronix Hikvision KX15DT Dual technology detector using PIR and Microwave sensors 15m bluewave
SKU: KX15DT
Price: 21.87 EUR
Availability: OutOfStock

Out of stock

SKU: KX15DT

Notify me when this product is in stock

This form is protected by reCAPTCHA - the Google Privacy Policy and Terms of Service apply.

Description

The KX15DT features Dual element pyro-electric sensor with X-band DRO based microwave both of which need to be triggered to set off the Alarm, this reduces the risk of false alarms.

AND/OR technology
‘AND’ mode operates as a standard dual technology detector, where both technologies need to active to cause the alarm. ‘OR’ mode will switch the sensors activation of the alarm input to be either the PIR ‘OR’ Microwave. This can be useful in environments where there is a risk of PIR detection being blocked.

Active self test
If there is no activation after a 5 hour period it will actually self test both the PIR and microwave.

Blue Wave Technology (BWT)
This technology further enhances the detector’s immunity to infra-red noise in the environment. BWT comprises of some key components:

The new 3D optics system enables perfect focusing of the infra-red signal onto the pyro-electric sensor. This allows BWT to clearly identify the positive and negative signal edges.

Digital temperature compensation digitally adjusts the detectors sensitivity to ensure performance is maintained
Powerful software embedded into a microprocessor is used to process the received information from the pyro-electric sensor. The result of this combination is lower infra-red signal noise amplification and therefore better immunity.

15m Volumetric detector
15m Volumetric detection coverage. Ideal for protection of rooms and offices in commercial environments.

Selectable EOL resistors
The detector incorporates selectable alarm resistor values of 6K8, 5K6, 4K7 &1K & tamper values of 5K6, 4K7, 2K2 and 1K catering for most control panels on the market.

Auto Sensitivity Feature
Depending on the environment condition, the detector will automatically adjust the sensitivity.

Microwave Frequencies Bands
3 different frequency bands to avoid interference between detectors are installed in the same room.

Data sheet

Blue Wave technology	Yes
Automatic sensitivity	Yes
Set sensitivity	Auto or Low
Digital temperature compensation	Yes
DEOL resistor on board	Yes
Tamper protection	Front and rear
3 microwave frequencies to avoid interference	Yes
Maximum range	15m
Volumetric coverage	Yes
Dual Technology	Yes
Detection speed	0.3- 3.0m/s
Coverage angle	85 degree
Detection zones	74
Detection planes	7
Anticloaking technology	Yes
Protection of area under the detector (creep zone)	Yes
White light filter	6500 Lux
Protection	Ultraviolet light filter
Lens	3 dimensional
Optics	Sealed optics
Detection method	Low noise dual element pyroelectric sensor and Microwave Doppler Sensor
Wall mounted	Bracket included
Ceiling mounted	Bracket included
Optimum coverage height	1.8 - 2.4m
Certified mounting height	2.4m
Storage temperature	-40C to 80C
Certified operating temperature	-10C to 40C
Nominal operating temperature	-30C to 70C
Physical dimensions (H x W x D)	117 x 69 x 50mm
Weight	125g without bracket
Operating voltage	9-16V DC 13.8V DC typical
Quiescent current consumption	24mA @ 12V (Min), 30mA @ 12V (Max)
Contact Resistance	<10 ohms
Relay outputs	50mA 60 VDC, 42 VAC (RMS)
Tamper switch	12V 50mA
Electrical conformity	CE
EN Certificate	EN50131-2-2:2008 \| EN50130-4:2011 \| EN50130-5:2011 \| PD6662:2010
Certification type	IMQ
Certificate number	CA12.01171
Environmental class	II
Security Grade	Grade 2
Electrical conformity	CE