The 48100E ESS series products use lithium iron phosphate (LFP) as the positive electrode material. positive electrode. They can be widely used in energy storage systems, such as residential energy storage, backup power and photovoltaic self-consumption optimization.
The battery pack consists of 15 cells/16 LFP battery cells connected in series. with low self-discharge, high energy density and no memory effect. This type of battery also has excellent performance in terms of high speed, long life, wide temperature range and safety.
Basic functions
Monitor: The battery system uses a high-performance BMS, with protection functions
such as current, voltage
Alarm: Support abnormal alarms such as overvoltage, undervoltage, overcurrent, short circuit, high and low temperature, battery failure, hardware failure, etc.
Communication: Provides two RS485 interfaces, uploads alarm and status data through RS485/CAN communication protocol.
- Parallel connection application: Support multiple battery packs in parallel, RS485/CAN communication supports up to 6 groups without control unit (or maximum supports 15 groups with control unit).
- Balance function: Supports the balance function of cells.
- Extended functionL Extended SNMP V2, SNMP V3, LCD, anti-theft and mixed use of lithium battery and lead acid battery.
This battery is suitable to be contained inside a Rack Cabinet: SKU 11556 (NOT INCLUDED)
COMPATIBLE WITH ALL HYBRID INVERTERS WITH 48V BATTERIES :
Single phase | Three-phase 10kW |
---|
SKU 11547 5kW | SKU 11743 5kW |
SKU 11529 6kW | SKU 11788 6kW |
SKU 11725 3.6kW | SKU 11542 10kW |
SKU 11803 8KW | SKU 11543 12kW |
and in general with the inverters of the following brands, up to 4 batteries in parallel of the same model for each device