V-TAC PRO VT-66-N samsung smd chip LED wall lamp with 2W power, equipped with solar panel, twilight sensor and movement sensor and constant brightness mode. Made of satin matt gray aluminum. 3000K warm white light color gradation, with 170° beam angle and 280LM high brightness luminous flux. Dimensions: 59cm HEIGHT
The lamp has a mini solar panel that powers the 3.7V 2600MAH rechargeable lithium battery, positioned inside the lamp. The Battery has an operating autonomy of approximately 3/12h. Recharging takes place via solar energy, which in just 4/6h allows the battery to be recharged to the maximum.
The lamp is activated by pressing the button located in the upper part of the frame. From the key it is possible to turn the lamp on and off and set the 2 operating modes. To activate its functions, just hold down the power button for 2-3 seconds and wait for the blue light to turn on. The functions of the 2 modes are:
- Mode 1: in the absence of light, the lamp will turn on with a light intensity of 10% and when the movement sensor detects movement (within 5 metres), the light will turn on with a light intensity of 100%. After 30 seconds, if it does not detect other movements, the lamp will return to 10% brightness.
- Mode 2: the motion sensor will be deactivated, therefore in the absence of light the lamp will always remain on with a light intensity of 100% until the battery is completely discharged (autonomy of approximately 4 hours).
It is also water resistant (IP65) and therefore can also be installed in outdoor spaces such as gardens, courtyards, villas, etc. The lamp is supplied with screws and dowels for easy wall mounting. An ecological and innovative solution for intelligent lighting.